| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | added noise and shakier ride after brake work | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=9853 |
9853, added noise and shakier ride after brake work
Posted by jZa, Jun-03-02 02:27 PM
ever since i had my brakes done, i've been hearing more road noise and the ride has been shaky above 70. I also had to replace a lug stud on each rear wheel since my @$$ is too clumsy to operate a lug wrench :(. So i have a few questions:
is it possible for alignment to be messed up after these jobs(i balanced the wheels but that didn't help).
how about the noise factor, I heard that slotted/drilled rotors add noise but i thought that would only be when braking (anyone know?)
I know my rear tires are rough due to 1 degree neg. camber.
so..
|
9854, RE: added noise and shakier ride after brake work
Posted by SEA97GS, Jun-04-02 02:25 AM
When you got the brakes done, were the rotors turned? Or did you just install new brake pads? If you just installed new pads, chances are you have a warped rotor that's causing the vibration.
|
9855, RE: added noise and shakier ride after brake work
Posted by ez, Jun-04-02 07:45 AM
It sounds like there is something wrong with the wheels/tires. Did they do a dynamic balance or a static balance - you may have to get them balanced again, because this happened to me once. When I got new rims/tires the ride was very shaky at 65+mph and this was after they were balanced, so they did a different kind of balance and then everything was fine.
New brakes shouldn't add to road noise. I have cross drilled slotted and there is no new noise from them. In fact it sounds quieter when I actually brake (must be because the old stockers were warped and shook everything) The noise and shaking of your car over 70+ points to wheels or tires. It would only be brakes if you saw these things under braking.
Oh, I have a question for you jza, in case you didn't see it in the audio section. I looked for closed cell foam on mcmaster.com and can't find it. Do you have the product #?
|
9856, RE: added noise and shakier ride after brake work
Posted by jZa, Jun-04-02 10:57 AM
I had all the rotors replaced, not sure what kind of balancing they did, but they did the balancing when I initially got the new tires and it road great so I'm really starting to think its the tires, I had rotated them with the brake job for the first time, after that i balanced them and the guy who did the work said i should put them back how they were (before the rotation) since the two that were origianlly in the back were "choppy", so i did, the ride was better after this but its still feels kinda crappy.
ez, i'll look for a part number and put it in the audio section.
| |