ok this is my second weekend trying to get my new suspension in..I have eibach prokit and KYB AGX...well im using the write-up from the home page and I cant get the first nut off...its driving me crazy...last week I ended up putting in my brembo and master metal pads and had no problem.. Its the nut that holds the swaybar link to the damper fork you need a 14mm cresent and 14mm socket...I already tried to jack up the suspension to get pressure off the sway bar...I have already stripped the nut for the crescent wrench! I can get the bolt to spin around but cant get the nut free..I cant seem to get enough force with the crescent wrench to hold when I start turning with the socket wrench..and yes I have a good breaker bar..and yes I used lots of wd40..would liquid wrench work better? I want to know if Im taking this nut off correctly? TIA