There's a ton of info about prokits on this board, but I haven't seen a definative "this camber kit part# goes with prokits." I listed only the front camber kit #, but what about rear kit # did you chose as well?

While I'm at it, with the prokit being only like 20% stiffer than stock, can you even feel that? (in terms of comfort)

15 dolla camber mod on the mainpage under mods. Basically you get longer bolts, and stuff some washers between the fender and the control arm to bring it out to correct camber. For the drop with prokits, you really won't need to get the ingalls kit, it really is the same thing..

for real? thanks bro... it'll save me some money. so did you have prokits before, cause it says you're running with H&R's now

>for real? thanks bro... it'll save me some money. so did
>you have prokits before, cause it says you're running with
>H&R's now

No, i never had the prokits, but the prokits drop you around 1.3-1.5 inches in the rear after settle, and my springs settled to about a 1.75" drop in the rear, and the 15 dolla camber mod just about put me in spec for my rear camber. I had to have 5 washers on the drivers side, and 6 on the passenger to get it in spec. With not as low of a drop, the required 4 washers on the mod page will be just about perfect with the prokits...

I have the prokit and the $15 (which cost me $20! LOL!) camber mod. Works fine. Just make sure you get at least grade 8 bolts! Very important.

**********************************

"Don't worry, I'm fluent in weirdo."
Hurricane_GS
eclipse@gcni.net
AKA: Glenn H. Shelton III
Saint Cloud, FL
1997 Eclipse GS Non-Turbo
http://eclipse.greenliquid.com
---------------------
Front Upper Strut Bar
Rear Upper Strut Bar
Custom Lower Front Tie Bar
Custom Lower Rear Tie Bar
AEM Cold Air Intake
Pace Setter Muffler
Custom Short Shifter (Only $40 - Email me for info! eclipse@gcni.net)
Smoke Tinted Clear Tail Lights
Custom Illuminated Center Tail
Tokico Blues
Eibach Pro Kit
Neuspeed Front Strut Bar

On the way:
Indiglo Needles

Yeah like Glenn said, save yourself some $$ and get the $15 camber mod(Mine only cost $19):P. It works fine.