| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | Widest tire to fit on stock 14's? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=8158 |
8158, Widest tire to fit on stock 14's?
Posted by Michael_97RS, Mar-31-02 03:09 AM
Okay I can't remember the width of the stock 14's how wide are they and what's the widest tire I can fit? figuring out what to do for future track runs.
Una salus victus.
It's not about being invincible, it's about being ready; for anything.
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: P&P Intake Manifold 1/2, P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
|
8159, RE: Widest tire to fit on stock 14's?
Posted by Fast420A, Mar-31-02 10:02 AM
I have 205's on my stock 14's but I wouldn't think you could go much wider than that.
________________________________________________________________________________________
current status - No 3rd Gear synchro
http://hometown.aol.com/ohshootuhh/
www.Fast420A.com
|
8160, RE: Widest tire to fit on stock 14's?
Posted by DeanoD, Mar-31-02 11:11 AM
You can put a BF Goodrich drag radial comp TA 215/60/14 on it. You can also put a Nitto 555R drag radial 205/55/14. The BF tires would be less than inch shorter and the nitto tires would be 2 inches shorter. I think if you dropped the BF tires down to 20 psi, they would hook really well. You could even drive to and from the track(with normal pressure).
If your car is going to stay normally aspirated, the nitto tires might be just what you need. If you drop the pressure in them real low, your car would be nearly 1.5 inches lower in the front. If your car is dropped fairly low, this might be a concern. You would also have to change wheels at the track for sure.
BTW: when I first got my car in 97, I drove on firestone firehawk SS10 tires for 2 years. The size was 215/60R14. They felt like I was skating on ice at 80+ mph, but they were sure as hell smooth riding.
This is definately the widest tire that will safely fit on the 5.5 wheel.
|
8161, RE: Widest tire to fit on stock 14's?
Posted by Michael_97RS, Mar-31-02 11:21 AM
Sounds good to me, I was looking at G Force T/A Drag radial in 215/60R-14. Glad to hear it will fit.
Una salus victus.
It's not about being invincible, it's about being ready; for anything.
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: P&P Intake Manifold 1/2, P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
|
8162, RE: Widest tire to fit on stock 14's?
Posted by bigbrent88, Mar-31-02 12:12 PM
Just to jump on someone elses post, whats the largest tire for 17 by 8 in rims. Tirerack recommends 215, but I figured 235 would fit. Take into consideration I want to do auto-x so having a soft tire wall is not what I want.
|
8163, RE: Widest tire to fit on stock 14's?
Posted by VX100, Mar-31-02 01:34 PM
our stock 14s are 5.5 inches wide, 215s should fit, barely
and, a 235 will fit nicely on a 17 by 8 rim
Mike, looking at drag slicks, are we???
here's a hint, look into hoosiers, they're expensive and you won't get as many uses out of them, but do you want to win or not? ;)
|
8164, RE: Widest tire to fit on stock 14's?
Posted by Michael_97RS, Apr-01-02 05:16 AM
Not slicks Todd, Drag Radials. I want a long life out of them... since I don't go to thet track as often as I would like, Drag radials should last forever. The 1955s on my 14's just don't give me any traction from memory. So I want something with a smaller aspect ratio and a stickier compound, just not ready for a slick yet.
Una salus victus.
It's not about being invincible, it's about being ready; for anything.
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: P&P Intake Manifold 1/2, P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
| |