Current set up Eibach pro kit springs and 18 inch wheels. How many degrees of correction do I need to get back to factory specs?? Any input would be appreciated!

Take it to a shop to see what degree its at right now. All cars repsond different.

I have prokits with 17s and I just did the $15 mod and it fixed it up just fine.
:D

how thick are all the washers when put together? So I can get the right thickness.

There were four washers on each bolt so that made it about an half to three-fourths of an inch thick I guess.
Hope this helps.
:D

Thanks thats what I needed to know, did you get alignment after you done the camber adjustments, if so do you remember what your readings were?

Glad I could help. Yeah you need to have it aligned when you put on the springs and the camber kit. I dont remember what my camber reading was after aligned but it is not bad. The guy said that the factory specs for the rear is around -1 degree(mine might have been like -1.2 degrees)
TIA
:D

I'm about to order my springs, so do we need any kind of kit for the front with the Eibachs or will the factory hardware allow for the proper adjustments??? TIA!!!