i have the necessary bolts and washers, but i wanna be sure im gonna do the RIGHT thing here. the four bolts that need to be replaced on each side are the ones you see flush against the inner fender well facing the back of the rim right? so just take them out, and put the bolt with the washers in their place? i read the mod link on the main page, but pics would kinda help, or a more in depth explanation. thanks a lot.

Your looking in the right spot. The rear camber mod is easy to do. Just loosen all of the bolts and swap them out one by one. You don't want to pull all of the bolts out at same time or you will have a problem aligning the holes back up. It will go like this: inner fender, washers, upper arm, lock washer, and bolts. Shouldn't take you more than half an hour.

thanks a lot man, i appreciate it.