How much will this mod fix the rear camber? 1 degree, 2 degrees, etc.? I am trying to decide whether to use 4 washers or not. Any help would be appreciated.

By the way I searched and could not find any info on this.

Thanks,
Jamie

I "think" it's a fixed +2 degrees....someone please correct me if I'm wrong. I have the RRE rear camber kit with spacers and longer bolts and it's a +2 degree fix.

what does the mod do? what is the difference after it?

it corrects camber to close to stock specs.. camber gets altered when lowering our cars which leads to the rear or front tires to angle like this /\ and the camber mod helps correct it to this | |

the link is on the main 2gnt.com page.. :-)

Anyone else? I only need to fix the rear camber by about 1 degree on the left side and right side. So if +2 degrees fixed is correct, and I use just 2 washers will this give me my +1 degree I need? Any and all help will be appreciated.

Thanks,
Jamie

you can add and remove washers as you see fit depending how much you want to fix the alignment.

just add washers, do a visual check to see if it's straight, and when you think you have it good, take it to a wheel shop to have a real alignment check down, and they'll tell you how much you're off by.