Who makes a strut bar that doesn't block the oil cap?


Mark S. Javier
99 RS

you should join the nuespeed strut bar group buy. It comes no where near the oil cap and in fact you can even put another bar in the normal location in addition to the nuespeed bar. Its only 68 bucks (if your using paypal 65 otherwise). the post is in the announcements section or you can email me and i will give you the guys info. 75 people have signed up for the bar, but only 54 have paid, so c'mon join already

I don't have any problems getting my oil cap off and the strut bar goes right over top of it. There is about 2 inches of space under the bar to grab the oil cap and spin it off.

You can also see the neuspeed bar back by the firewall.




______________________________
current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

do you recommend the neuspeed bar? i have pilot fu and ru, and the rre fl bars. ps...the rear pilot bar sucks.

dom

How does the neuspeed strut bar mount? I was thinking about getting one, and giving into the peer pressure.

Mark S. Javier
99 RS

>How does the neuspeed strut bar mount? I was thinking about
>getting one, and giving into the peer pressure.




Look at the picture of my engine bay I posted and you will see the black neuspeed bar back by the firewall.


______________________________
current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

I can see the picture, but I can't see how or where it mounts in the engine bay.


Mark S. Javier
99 RS

i have the pilot stb and the neuspeed. even with the pilot (and its bent lower on the A/S cause we have less hood clearance) i can still get the oil cap off.

and this is how the neuspeed bar mounts. thats the A-Arm Anchor bolt. i think the neuspeed bar actually does more since it ties the two anchor bolts together.

$65 for non-oil cap blocking bar here:

http://www.asog.net/bbs2/viewtopic.php?mode=viewtopic&topic=9632&forum=2&start=0

http://www.2gnt.com/dcforum/DCForumID14/1158.html
A bunch of us 2GNTers are in on this with the ASOG guys, but we need 17 more orders for it to go through. If you already have a bar, you can add this so you'll have two!

juan

Thanks guys for answering my questions. I'm giving into the peer pressure, and ordering one. You guys should be used car salesmen or something:)


Mark S. Javier
99 RS