Go back to previous topic
Forum nameHandling/Suspension
Topic subjectRE: Need your help on putting together handling stages for 2gnt
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=5522&mesg_id=5545
5545, RE: Need your help on putting together handling stages for 2gnt
Posted by espilcEGS, Dec-31-69 06:00 PM
Thanks for bringing up that point MuRiX. I would have responded sooner, but i was out of town. I couldn't understand the theory behind koolade9's post. I wrote RMDSM so they could explain it better. Here is what they had to say:

It is really great to hear that you are enjoying the bars. As far as the comment about bars/springs installation order, it does not make much sense. The bars do not effect travel other than by minimizing body roll. They help the situation on the outside of the turn (less roll means the outside suspension is less compressed therefore it will have more travel and less tendency to bottom out). The short travel on the 2G DSM is a concern, and bottoming out can happen especially when the car is lowered, but the bars do not increase the problem. Have fun!

Michael - RMDSM


I generated this page in 0.0076658725738525 seconds, executing 6 queries.