| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | whats needed? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=5194 |
5194, whats needed?
Posted by mitsuman, Dec-20-01 06:10 AM
whats needed when putting on springs? tia
"Proud to be, a 2gnt"
-mitsuman
Performance:
1. AEM cold air intake
1. NGK plugs
Ride:
1. motegi mr7 17'' wrapped in yokohama A550v 235/45/17
Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn amp
In room:
1. blitz front end(thnx 2 eclipse804)
2. H&R sport springs(thnx 2 eclipse804)
Fun mods:
1. "Nozzel mod" :)
Wanted:
1. to much ish to list... but a boy can dream :)
coming very soon:
1. CF hood
|
5195, RE: whats needed?
Posted by Logic3, Dec-20-01 06:31 AM
All you need is your basic tool set, 17mm Cresent wrech, 17mm Socket, torque wrench, jack, vice-grips, and spring compressor. I think that's all I had when I installed mine, at least thats all I can think of off the top of my head. Check out Corbins Link on installing springs.
http://www.houstonhardware.com/~cbehnken/struts.html
Oh yeah, when you take the springs of the struts wrap a towel around the "flat part" of the strut and use the vice-grips so you don't strip the top of the sturt shaft. I think Klipzracer is the one he mentioned that a while back
Good Luck!
|
5196, RE: whats needed?
Posted by mitsuman, Dec-20-01 11:29 AM
cool thnx.
"Proud to be, a 2gnt"
-mitsuman
Performance:
1. AEM cold air intake
1. NGK plugs
Ride:
1. motegi mr7 17'' wrapped
in yokohama A550v
235/45/17
Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn
amp
In room:
1. blitz front end(thnx 2
eclipse804)
2. H&R sport springs(thnx 2
eclipse804)
Fun mods:
1. "Nozzel mod" :)
Wanted:
1. to much ish to list... but a
boy can dream :)
coming very soon:
1. CF hood
| |