Go back to previous topic
Forum nameHandling/Suspension
Topic subjectMy car pulls....
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=4389
4389, My car pulls....
Posted by Semperboost, Oct-04-01 03:43 PM
LAST EDITED ON 04-Oct-01 AT 08:46 PM (PST)

..pulls to the left. It started happening today. Just all of a sudden after I go to the gym and get in my car..it seems...glued to the ground, at low speeds. When I step on the gas a little it pulls to the left. I know it's not the alignment cuz then I would be pulling to the left no matter if a throttle it or not. I think it might be my CV joint/ boot, i dunno. Has anybody had this problem. Hope it's not the tranny. THanks

ALvin



Star stage I
Starion I/C
GReddy BOV
Nology Wires
APEXI EL Boost Gauge
Southland Dual Friction Clutch
B&M Short Shifter/ Shifter Bushings
17" Axis Wheelsite Mesh - 235/40
Camberkits
Eibach Sportlines on KYB AGXs
Strut Bars/ GST Rear Sway Bar
X-Drills w/ Axxis pads
Andy's Front Bumper
Stock Skirts
Cleared Headlights

4390, RE: My car pulls....
Posted by Kory, Oct-04-01 03:44 PM
???




Kory
fasteclipse@cisco.com
aim sn: dukmahsik
Happy Honda Hunting!
4391, RE: My car pulls....
Posted by EvMan2345, Oct-04-01 03:47 PM
Have you checked your tire pressure in the left tire??

Evan
97 Eclipse GS
Stamford CT
EvMan2345@aol.com
4392, RE: My car pulls....
Posted by koolade9, Oct-04-01 04:09 PM
I had that problem for along time...even after I got the alignment done.

It was one of two things (for my case): I tighted down the wheels(also stopped my shimmy at 85mph:) and I pushed out the camber on the rear wheels some more...

__________________________
...just my $.02
95 GS


4393, RE: My car pulls....
Posted by EvuLFleA, Oct-04-01 04:14 PM
Torque steer?



Still being designed but worth a look!
www.extreme420a.com


4394, RE: My car pulls....
Posted by XT_DSM, Oct-04-01 04:45 PM
http://members.home.net/xtatdsm



this happened to me 2 days b4 my balljoint fell apart and caused me to almost crash.

did u do the balljoints recall yet?



Adel



Ported TB and Intake manifold ** ported and milled head ** PT rockers and lifters ** Crane Drag cams #16 ** Crane valve springs and retainers ** AEM cam gears ** Hotshots headers ** Greddy Cat back ** Iceman CAI ** S-AFC ** and the usual handling mods