Go back to previous topic
Forum nameHandling/Suspension
Topic subjectCAMBER KITS
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=4055
4055, CAMBER KITS
Posted by mrnic001, Nov-14-01 12:22 PM
LAST EDITED ON 14-Nov-01 AT 06:32 PM (PST)

I have the number where people can get Ingalls camber kits for around $300 all the way around. And both kits for front and rear are from -1°/+3°.

Email me if you want the number. TYM2GO_01@hotmail.com




"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE IT LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars, $15 camber kit..........ect

4056, RE: CAMBER KITS
Posted by Fast420A, Nov-14-01 03:52 PM
Thats about average prices. I paid $150 for my Sprints up front. They adjust the same amount. Rears were the same prices but I just did the $15 camber kit because my drop isn't that bad.




http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono



4057, RE: CAMBER KITS
Posted by mrnic001, Nov-15-01 08:19 AM
I have about a 3.5" drop on mine and the $15 kit didnt cut it in the rear.




"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE IT LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars, $15 camber kit..........ect
4058, RE: CAMBER KITS
Posted by klipzracer, Nov-15-01 09:18 AM
3.5?!?!?!!? are you sure? that's about an inch off the ground! i got as 2.5 on mine and it's pretty freaking low.

Chris Dishmon
chrisdishmon@hotmail.com

1990 GSX (like Jen and Cody's 1st gen it's sitting in peices :))

1997 RS (with the kit that's kitted out)

http://www.homestead.com/klipzracer/index.html


4059, RE: CAMBER KITS
Posted by mrnic001, Nov-15-01 03:30 PM
Well if I had to be technical its about 3.3". I need to raise it up a bit.....believe me!



"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE IT LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars, $15 camber kit..........ect
4060, RE: CAMBER KITS
Posted by Fast420A, Nov-15-01 06:01 PM
Yeah with extreme drops you do need a rear kit. I am only 1.5 inches and I still have a little negative camber with the $15 mod but the tires are lasting MUCH longer.




http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono



4061, RE: CAMBER KITS
Posted by EvuLFleA, Nov-15-01 06:14 PM
Got a pic of a 3.3" drop? The lowest I have seen for a daily driver is about a 3" drop (cut sprint springs) and that thing has about 1.5 inches of clearance driving in north dakota. He lately cracked his bumper and broke his side skirts.

www.extreme420a.com