I have ingalls front camber kits on my car, and they sqeak like hell. They are polyurethane so they need to be lubricated im pretty sure. What do I use and how do I apply it?

Ryan
Ryeguy2002@Hotmail.com
'97 Mitsubishi Eclipse


http://springfielddsm.homestead.com/ryan.html
http://www.monkeygods.com/Ryan
(Fast connection suggested)

I am having the same problem with that right now, I am workin on a solution. I will let you know when I figure something out. When I installed them I put some lub in there, but that was along time ago I guess that shit all dried up.

well you could install some grease fittings into the suspension part that has the new bushing that way you could use a grease gun and pump it full of lube ever so often.. you would probably have to take that peice off and have someone install them or something.. i think i saw it done to a car that was having its whole bushing set replaced. probably should have done that in the beginning when i had mine done.. but i can deal with squeaks or i hope i can. :-)


-Jason



95 GS

Short-air ram - custom grill - removed front license plate - custom stereo system - 2 Kenwood 10's powered by Kenwood amp - Hiper Blue Headlights - F&R Upper Strut Bars - 2 fan mod - Energy Suspension Bushings

any other ideas?

Ryan
Ryeguy2002@Hotmail.com
'97 Mitsubishi Eclipse


http://springfielddsm.homestead.com/ryan.html
http://www.monkeygods.com/Ryan
(Fast connection suggested)

I have just recieved my front camber kit and I am wondering if you had any out standiing issue with the install. If you can provide me with any info I would be greatful.




"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE IT LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars, $15 camber kit..........ect

I had a shop install my for me. 3 months -- perfect tread wear and no problems so far.

Ryan
Ryeguy2002@Hotmail.com
'97 Mitsubishi Eclipse


http://springfielddsm.homestead.com/ryan.html
http://www.monkeygods.com/Ryan
(Fast connection suggested)

how much was the install ryan?

The automotive shop I went to called "Jim's Automotive", charged $50.00 for correcting all four wheels' camber and an alignment. Really good deal, I think I got pretty lucky.

Was that $50 bucks for installing the camber kits and allignment on all 4 wheels? Or is that $50 bucks a wheel. If you only paid $50 bucks for everything you got one good ass fuckin deal!! I installed my camber kits myself, while I thought it was easy if I worked at a shop I would charge more than $50 bucks (sorry but suspension work is a bitch, everything is on so fuckin tight). Now if I knew you that would be a different story. Shit it cost me some $100 bucks to get my car alligned after I finished my install. They claimed it was a special allignment and they had to charge me, plus I bought some cool service plan for X amount of money, I forget, to get my car alligned for as long as I own my car for like $10 bucks. Most shops around my area want between $150-$250 for install and thats without allignment (ya I know the shops around here rip you off, thats why I don't deal with them.)

The place charged $50 for everything. Camber correction on all four wheels and alignment. The people there are really friendly too -- maes me glad that there are decent people in the world, not out to rip you off...

That's a ridiculously good deal. I usually have to pay like $85 bucks for an alignment. On installing, I did it myself. There are no real issues except for everything being tight. Just follow the instructions. You can clearly see the parts you have to replace with the new ones.

Christian
99 GS Anniversary Edition


http://www.ichibanracing.com/