| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | question about offest of lug pattern |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=3361 |
3361, question about offest of lug pattern
Posted by PuRe RaGe, Jul-22-01 04:40 AM
LAST EDITED ON 22-Jul-01 AT 09:41 AM (PST)What is the patern of offset and any other info I will need to order wheels? I am trying to get a hold of like 14x8's or 15x8's for some slicks and need to make sure the lug holes line up.
Thanks guy's
|
3362, RE: question about offest of lug pattern
Posted by Kory, Jul-22-01 04:47 AM
hey dood,
offset has nothing to do with your lug pattern. Offset has to do with how much your center piece is "off" positive or negative from factory specs. Our factory spec is 46mm i believe... just get any rims coming close to that offset and you'll be ok... say if u got an offset of 40, that would mean the center piece of the rim is moved back 6mm from the front, causing a bigger lip. with X by 8s you'll want close to 46mm as possible.
Kory
ticklemekory@cisco.com
aim sn: dukmahsik
Happy Honda Hunting!
|
3363, RE: question about offest of lug pattern
Posted by koolade9, Jul-23-01 08:43 AM
you're half right about that....the offset is the distance from the hub to the center of the wheel, it's not the amount of lip. I've got 45mm offset wheels and they don't rub....I wouldn't try going to much farther out(cyan would know how far out you can go).
for the bolt pattern...it's 5 on 114.3
__________________________
...just my $.02
95 GS
|
3364, RE: question about offest of lug pattern
Posted by jZa, Jul-25-01 02:34 PM
hey man!
if you go to the 'turn harder' section of dsm.org there's a chart somewhere with a bunch of patterns and offsets that fit, don't fit, and somewhat fit
javi d
vroom n' boom
![]() 
|
3365, RE: question about offest of lug pattern
Posted by Stan2gnt, Jul-26-01 05:51 AM
Better yet go to Extrememotorsports.com under race catalog and get them there. they have lightwieght FWD 14"s drag wheels(and slicks) already figured out fo you. So you may pay a little more but judging by what you've already purchased to this point it will be a drop in the bucket.
Since I cant use photopoint IMAGINE THIS:
Star turbo with E-trim and HKS BOV
Starion FMIC/2.5" piping
Joe P MBC
Apexi SuperAFC
Ross Pistons/total seal rings
Ported and matched intake manifold
AFX 55mm TB, FMM and UDP
2.5" downpipe back exh/Hayame muffler
Crane wires/Denso Iridium plugs
Centerforce DF clutch
KYB AGX struts/ST springs, UPR FSB, F&R camber kits
17" ADR lightnings/toyo FZ4 215/45/17
97' eclipse front end/projectors
Autometer gauges
Panasonic head unit/ Sony X-over
MB Quarts all around/JL stealth sub
Hifonics/MTX Thunder amps
XX brand alarm/Varad hyper green led
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user
|