Well, time for a stupid question. The rear knuckle I got (and installed the ES bushings) is the newer version and the back where the hub assembly bolts go is not as thick. Other than that, it's identical to my early version. Now, I had to remove the dust cover from the back so that the ABS sensor ring would clear. I don't like the thought of leaving the dust cover off, so what's the best way to remove the sensor ring, being that it serves no purpose on my RS? I looked for a hub assembly with the 6/96+ style ring (to clear the dust cover), but all the assemblies that are for sale come with the early style. Will I need to cut the ring off or can I pull it off with some sort of puller?