Go back to previous topic
Forum nameHandling/Suspension
Topic subjectCrossmember
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=32782
32782, Crossmember
Posted by baconater3000, Dec-31-69 06:00 PM
If I am in the wrong section just move it for me please....
But anyway isn't there bushings that go between the crossmember and frame.? or under the crossmember between it and the bolt...Let me know Im really just trying to figure this one out. Thanks
32785, RE: Crossmember
Posted by Ebster1085, Dec-31-69 06:00 PM
There are 6 bolts that go through the cross member. Two on the front, two for the front mount, and two in the rear. The only two bolts that have bushings on them are the front ones.

They are the same bushing type as the shifter base bushings. A metal sleeve surrounded by soft rubber.
32788, RE: Crossmember
Posted by baconater3000, Dec-31-69 06:00 PM
Originally posted by Ebster1085
There are 6 bolts that go through the cross member. Two on the front, two for the front mount, and two in the rear. The only two bolts that have bushings on them are the front ones. They are the same bushing type as the shifter base bushings. A metal sleeve surrounded by soft rubber.


Thank you very much, I found mine laying around in a box...Thanks
32789, RE: Crossmember
Posted by Ebster1085, Dec-31-69 06:00 PM
No problem man.
I generated this page in 0.025400876998901 seconds, executing 7 queries.