Go back to previous topic
Forum nameHandling/Suspension
Topic subjectRE: slop in 2g rack
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=32260&mesg_id=32263
32263, RE: slop in 2g rack
Posted by CODE4, Dec-31-69 06:00 PM
Originally posted by lamrith
Before everyone says balljoints, I dug into it and it is NOT the bushings or ball joints in the suspension, wheel, hub.


We are not going to say ball joints because it is not the ball joints. If you had play at the 12 and 6 o'clock then it would be.

Grabbing the tire at 3 and 9 o'clock and finding slop is more often than not inner and/or outer tie rods.

Inner tie rod - $20 @autozone.
Inner tie rod removal/install tool - $60 @NAPA.

Looks like a foot long piece of black pipe with a square drive on one end. Try to rent it if it is available in your area.

And of course, alignment.
I generated this page in 0.0069119930267334 seconds, executing 6 queries.