| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | Drum to disc convertion, rim question |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=30530 |
30530, Drum to disc convertion, rim question Posted by Blmet, Jun-14-07 08:32 AM
Will stock 97 14" rims fit over a rear disc set up?
|
30531, RE: Drum to disc convertion, rim question Posted by red96rs, Jun-14-07 08:41 AM
From what i hear its SOME 16" rims and all larger rims. I might be wrong though.
I found whole crap load of info using the Search feature. Give that a shot too.
|
30539, RE: Drum to disc convertion, rim question Posted by EclipseTical, Jun-15-07 07:24 AM
Originally posted by Blmet Will stock 97 14" rims fit over a rear disc set up?
NO.
|
30540, RE: Drum to disc convertion, rim question Posted by Nightfall, Jun-15-07 09:22 AM
That don't really make any sense, all 4 stock 14's are the same and they fit over the front disc brakes fine why wouldn't they fit over the rear? When I bought my RS I swapped wheels with my GS which had rear discs and didn't have any problems.
|
30541, RE: Drum to disc convertion, rim question Posted by red96rs, Jun-15-07 09:44 AM
my bad there i was thinking of the GSX front brakes mabye
|
30547, RE: Drum to disc convertion, rim question Posted by GorkoRacing, Jun-17-07 07:38 AM
I have swapped to rear discs and have had my 14s on. Yes they do fit.
|
30548, RE: Drum to disc convertion, rim question Posted by talon749, Jun-17-07 07:42 AM
uhh my talon came with 14'' wheels and had rear discs stock too, it all fits up just fine?
|
30553, RE: Drum to disc convertion, rim question Posted by EclipseTical, Jun-18-07 06:19 AM
Originally posted by red96rs my bad there i was thinking of the GSX front brakes mabye
yea i brainfarted and had GSX calipers in mind as well. Has been far to long since i owned the Rs and did the swap.
|
30556, RE: Drum to disc convertion, rim question Posted by Blmet, Jun-18-07 08:14 PM
Thanks guys,
One more question. The backing plates on the ebrake assembly are in bad shape. Are they that important that I most have them intact? I assume they just stop break dust. My question is should I be concerned about the backer plates? The ebrake functions perfectly fine.
|
30559, RE: Drum to disc convertion, rim question Posted by RoninEclipse2G, Jun-19-07 05:01 AM
they're mostly there to stop road debris from getting into your pads and calipers except for the e-brake cable retainer. you can trim them down if you like, just keep in mind you run a higher risk of getting a rock lodged in your pads and grinding away at your rotor. I'd say clean em up and straighten them out and paint the suckers.
|