| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | Went to get an alignment and now a camber question |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=27537 |
27537, Went to get an alignment and now a camber question Posted by 420a-Tnthewerks, Jul-11-05 01:08 PM
I could tell my camber was off and when I went to get an alignment I found out the front is 2* off and the rears are 1.75* off. I'm lowered 1.5"-2" and I did the $15 camber mod in the rear with four washers.
I know alot of people on here are lowered so what did you do? Is that much fine or will I be changes tires often? Do I have to get camber kits for them?
|
27538, RE: Went to get an alignment and now a camber question Posted by 420a-Tnthewerks, Jul-11-05 01:23 PM
Well I was searching and I didn't find any exact numbers that I'm dealing with but 1.75* seems to be too much correct? Damn, I wanted to be done with the suspension :(.
|
27541, RE: Went to get an alignment and now a camber question Posted by mcgyvr, Jul-12-05 01:27 AM
Im assuming you mean -2 and -1.75 so yes thats too much -1 to -1.25 deg is the max I would run with the toe being perfect.
time to add more washers and get a front camber kit for you
|
27545, RE: Went to get an alignment and now a camber question Posted by 420a-Tnthewerks, Jul-12-05 03:15 PM
Originally posted by mcgyvr Im assuming you mean -2 and -1.75 so yes thats too much -1 to -1.25 deg is the max I would run with the toe being perfect. time to add more washers and get a front camber kit for you
Alright, thanks. Don't know if I feel safe with putting more washers in though.
|