| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | Quick question about $15 camber mod? |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=25546 |
25546, Quick question about $15 camber mod?
Posted by er0ckz, Dec-31-69 06:00 PM
I've search and I couldn't find a post about bolt sizing. What exactly is the size of the bolts? Thanks
|
25547, RE: Quick question about $15 camber mod?
Posted by madhatter210, Dec-31-69 06:00 PM
it's in the mods section
copied right from it.............
Parts List
- Eight (8) M10x40, 1.25 threaded bolts (Grade 10.9 preferred, Grade 8 acceptable)
- Thirty two (32) M10 flat washers, preferably hardened
- Eight (8) M10 split lock washers.
- Anti-seize compound.
and heres the link for the write up
http://www.2gnt.com/nuke/modules.php?name=Sections&op=viewarticle&artid=19
|
31150, RE: Quick question about $15 camber mod?
Posted by EventsCo21XL, Dec-31-69 06:00 PM
Sorry everyone to bring up an old topic, but for the bolt size, I checked the VFAQ
(http://my.att.net/p/s/community.dll?ep=16&groupid=94647&ck=)
for the mod and the bolt size is listed there, but for some odd reason, when I tried to get those bolts to thread, they wouldn't. Now I was looking at my stock bolts and the threads seem to be just a bit smaller than the ones that the VFAQ stated. Unless the bolts used for the GS-T is different from our cars? That would be weird IMO though.
So my question to all of you here is whether or not you think that my OEM bolts got changed somehow, or do I just have a odd situation on my hands?
I don't mind having to return the bolts I bought, but I just kinda found it weird that the bolts suggested were wrong for my car ?!?!?!?!?!?
To anyone that can help me, I'd appreciate it. Thank you in advance everyone.
|
31156, RE: Quick question about $15 camber mod?
Posted by mcgyvr, Dec-31-69 06:00 PM
you bought the wrong bolts.
|
31162, RE: Quick question about $15 camber mod?
Posted by EventsCo21XL, Dec-31-69 06:00 PM
what bolts should they be then if you don't mind me asking?
|
31194, RE: Quick question about $15 camber mod?
Posted by mcgyvr, Dec-31-69 06:00 PM
Originally posted by EventsCo21XL
what bolts should they be then if you don't mind me asking?
You should buy the bolts in the DIY.
I think you "somehow" just got the wrong thread.
|
31216, RE: Quick question about $15 camber mod?
Posted by TheGhost, Dec-31-69 06:00 PM
U used fine bolts you needed extra fine tread bolts go to napa
|