| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | Turning right problem? What could it be? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=24604 |
24604, Turning right problem? What could it be? Posted by freddy_00_69, Jul-02-04 07:43 PM
Even the slightest turn it makes a metal sound like something rubbing,but there is nothing rubbing under the car. It does when turning the steering wheel right and when turning right completely. It does not do it when i turn left or driving straight. I replaced my driver side cv halfshaft and that didnt fix it, it does not get louder it is just a little loud and can be felt on the floor of the car in the drivers side and passenger side. I was wondering if it could be the passenger side halfshaft or one of the joints if the half shaft or anything. Tie rod and ball joints look fine and are onn good. The sound is something like metal rubbing on another part of the body or drive shaft. Any help would be appreciated. Thanks in advance.
|
24779, RE: Turning right problem? What could it be? Posted by Chip176583, Jul-16-04 04:56 PM
I'd say it would be one of the lower ball joints...I had that same problem and i just greased up the joint and no more sound idk if this helps...
|
24780, RE: Turning right problem? What could it be? Posted by Doug96GS, Jul-16-04 05:35 PM
Bad wheel bearing? That's what mine was.
|