Originally posted by WickedESi
I haven't got to test them out yet. I had to find a 9/16" x .10" tap to fix the holes in the caliper on the right side because they overtorqued the bolts into the caliper for shipment and I had to use an impact gun to take them out to disassemble them and the bolts and threads where ruined. I had to get two new caliper bolts and the little rubber bushing on the end of the top bolt because that wasn't included when I ordered the two, not to mention those three things together were almost $30.

My bleeder screws were broken off into the holes during shipment so Gilee gave me a little money back for new bleeders. I had to extract those studs, then I ordered some Speedbleeders. They sent me the wrong ones so I mailed those back, and I'm waiting on the correct ones to arrive....

So, I should know if the braking was worth it soon enough.

Oh boy...

If this doesn't make the situation any worse...

My wheels don't fit over the caliper~!@ due to the un-normal +42 offsite I got on them. :whoa :cry :wallbash