I am lowered 2" with sprint springs and tokiko blues. My alignment is off.

I did the home brew kit for the rear camber, do I need a camber kit for the front?

Does anyonne know the specs?

Should it be adjusted back to stock specs for the alignment?

Thanks for your help.
Dan

i needed the ingalls extreme camber kit to fix my camber. i was out 1.4 degrees on one side and 1.7 degrees on the other.

Originally posted by Dan Zeller
I am lowered 2" with sprint springs and tokiko blues. My alignment is off. I did the home brew kit for the rear camber, do I need a camber kit for the front? Does anyonne know the specs? Should it be adjusted back to stock specs for the alignment? Thanks for your help. Dan

Take your car to a trustworthy shop that uses computer aided alingment machines. They will tell you how far your car is off from OE spec. so you can buy the appropriate offset cams/bushings.

But like it was said above, for a 2" drop you should probably getting a correction kit that has the adjustability between 1.75* - 3.00* or so.

sorry I'm so late but here are the specs...


FRONT: 0* + or - .5*
REAR: -1.5* + or - .5*


That is within spec. I just did mine lol. And I dropped 2" on coilovers with -.5 in teh front....(within sppec)

i just had coilovers installed, car sits low, not sure how low tho (sorry i dont have any pics yet) i was wondering where i can pick up a camber kit, also will i need one on the front? THanks in advance