i have taken the caliper off and the bracket that holds the caliper on. I have freed them of the rust and everything. I can wiggle them back and forth but they wont come off. Is there anything else that holds them on? Need help asap!!!!!!

I already told you why it wont come off!! :D


I'll check haynes when im home from work if no one has rsponded

ok figure 5.6B on page 9-9

"To free a stuck disc, thread bolts of the appropriate size into the holes provided in the disc, then tighten them alternately a little at a time until the disc is free"

Or in my case, it just ripped two larger holes on each side of each rotor. That rocked. Out came the sledge..

I do it like this everytime and not waste time any other way.

http://vfaq.com/mods/BrakeRotors.html

Make sure u release the parking brake. I've forgot to do that before and i beat on them all day with no luck. Release the brake and boom.. they practically fell off. LOL

yeah i really feel like a DA. I had the parking brake up LOL they came right off after that. Im loving the 13" rotors on the front and the 11" rotors on the rear :thumbsup to Armond

Originally posted by Sitinlo
yeah i really feel like a DA. I had the parking brake up LOL they came right off after that. Im loving the 13" rotors on the front and the 11" rotors on the rear :thumbsup to Armond

Don't. Been there, done that. I've done that myself and struggled with the damn things for hours!! "Oh I wonder if dis-engaging the parking brake will help?" LOL

lol.. glad to hear that fixed ur problem. good luck with the new rotors.. I just did the gsx swap w/ crossdrilled/slotted rotors.