Im thinking of installing a Tokico strut/spring combo which drops about 1.5". Will I have a problem with my 235-45-17 tires and this drop? I dont want to worry about them rubbing. thanks

You'll hear both sides of the fence on this one . . . some will say you will rub, others say they don't have problems.

Good luck, that's a phat ass tire!



forums.2gnt.com/dcboard.php?az=show_topic&forum=12&topic_id=13280&mesg_id=13280&page=
Current Status: HVAC Sent in

need to know the offset on the wheels you got
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

Im not sure, their stock Enkei rims from an 03 Evo VIII.

Here was my setup:

Tokico Illumina spring/strut combo
17x8, 235/45-17, 40mm offset

You will have to roll the rear fenders and there is no way around it. After i got the fenders rolled, i didn't have any problems.

Thanks man, I did a search on rolling the fenders and couldnt find much. How did you do it? Was it pretty simple?

There was a how-to on here a few years back. Had to do with using a heat gun to warm the paint and a baseball bat between the tire and fender to roll it up. This is a big pain in the butt and hard not to start cracking the paint. Give all the local shops in your area a call and ask if they roll rear fenders or know someone who can. There is an actual tool that bolts up to the lug nuts. It has an arm with a roller on it that rolls the fender lip up.