Hi guys. Just a few quick questions. I have a set of maxspeed coil-overs and by the end of May, get a set of KYB AGX adjustables. About the bump stops in the front, is it better to just cut that? or just get those ground control front mount to increase suspension travel in the front? Are they compatible with a different brand of coilovers? Do any of you know how much it costs, the site offered it as a 100 OPTION upgrade to the GC coilover kit. Are there any other places that I can get these? I've heard our cars bottom out a lot due to that fact that our suspension system has very little suspension travel. I read somewhere that even if you lower the car just an inch, you'll cut the travel in half. I don't know if this problem is for the 1G or 2G though. Just wanted to prevent this from happening. Thanks!!!!

hahaha, suspension travel....i lack it.
on a real note though, i didnt know about a GC kit to increase travel but i am REALLY interested in one, im about to install some koni yellows on a bit of a serious drop and i want to increase the amount of time before i blow those 150-dollar bastards as much as i can. they arent covered under their warranty for more than like a 1.75" drop and i am just barely, (barely!) exceeding 1.75 inches. hehe, someone fill us in...

http://www.geocities.com/blue2gnt

more suspesion travel cyan!?!??!?!?!?
say bye, bye to your fiberglass, neegah!

Chris Dishmon
-----------Mods-----------
Interior:
-color painted interior
-fire extinguisher
-Topspeed short shifter
-aluminum shift knob and pedals
-Grant Evolution steering wheel
Exterior:
-Neo Blitz Front Bumper
-17" ICW 10 spoke wheels w/ 215/45 yokahama's
-APR GT1 adjustable aluminum wing
-Toyota Supra turn signal/foglights
-Aerogear fiberglass hood w/ Sparco hoodpins
Engine:
-Weapon R intake w/ ram air hook up
-NGK plugs
-Accel 8mm ignition wires
-Catco hi-flow cat convertor
-Apexi Dunk Muffler
Suspension:
-front and rear strut tower bars
-Tenzo R lowering springs
-front and rear camber adjustment
Stereo:
-Kenwood In-dash CD player
-Kenwood graphic EQ
-Orion Cobalt amp
-6 1/2" Infinity Kappa speakers
-6X9 Alpines speakers
http://klipzracer.homestead.com/index.html
chrisdishmon@hotmail.com

HAHAHA, yeah man i need more travel cause dropping 5" sort of took away all of the travel that i had before. i think i can get around without breaking my fiberglass, ive done it for almost 3 years on a 2" drop and for several months with 4"+ drop neegah

http://www.geocities.com/blue2gnt

Hey Cyan, and how is Koni going to know how much you are dropped? lifetime warranty from what I hear for original purchaser...

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), TSW Blade 17x7.5 (need tires)

its simple, they have a machine that runs the strut through a test to see how much pressure has been exerted on it. they figure in the cars weight and the pressure exerted on the strut and the computer tells them the amount the car was dropped. at least this is how tokico does it, i would assume koni does the same

http://www.geocities.com/blue2gnt

Thanks... I didn't know that. Another piece of info I can file away.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), TSW Blade 17x7.5 with Bridgestone Potenza RE730 215/45ZR-17 on the way!!!