| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | Tire and Rim question |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=22991 |
22991, Tire and Rim question Posted by Pushin420a, Mar-13-04 01:01 PM
I just got these rims in the mail. I was wondering, what tire is the widest tire I can put on it? The size I was gonna go with is 215/45/17..SO I can keep the speedo right, I"m not to concerned about that though....I would rather have handling. I'm wanting the widest I can go and still stay safe.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43958&item=2466622831
Http://
|
22992, RE: Tire and Rim question Posted by CODE4, Mar-13-04 01:49 PM
Perfect. 215 is great for a 7.5" rim width. I run 205 on my 7". You could run a 225 even if you wanted, but 215 will give you near perfect sidewall lineup on the bead.
|
22993, RE: Tire and Rim question Posted by Pushin420a, Mar-13-04 01:52 PM
I gave the wrong rim...mine is 17x7...so let me know on that thanks
|
22995, RE: Tire and Rim question Posted by JustOne, Mar-13-04 02:57 PM
I have 17x7 and I run 215-45-17's
|
22996, RE: Tire and Rim question Posted by Pushin420a, Mar-13-04 03:10 PM
cool thanks for the input guys...
|
23008, RE: Tire and Rim question Posted by Uberingram, Mar-14-04 10:55 PM
Told ya so, Lee. :P Thx for the input guys, I wasn't terribly sure either.
|
23010, RE: Tire and Rim question Posted by SilverRS, Mar-15-04 01:30 AM
I run 215/45 on a 7" wide rim with no problems. I think you can run up to 225.
|
23015, RE: Tire and Rim question Posted by Skrilla, Mar-15-04 10:40 AM
You can go all the way up to 225 on a 7" wide rim but you lose absolute traction from the sidewall. With 205 you will actually lay down more tread to the gound because there won't be any buldging of the tire. On 7.5 you want 215 and on 8" you want 225.
A tire with 215 on a 7" will not lay down as much traction or maintain cornering ability like a Tire/rim combo of 7.5"/215.
EDIT:I only gave this info because you said you were most interested in handling and 215 on 7" wide rims aren't as good as 205 on 7" wide.
On my rims they are 8" wide on 225 aspect width tread
|
23018, RE: Tire and Rim question Posted by Ryan_Hes, Mar-15-04 12:11 PM
Nice lookin rim
|
23019, RE: Tire and Rim question Posted by EvuLFleA, Mar-15-04 04:22 PM
225/45/17 is actually closer to the stock tire/rim size. 215/45 is very close though. Since they are 7" go with 215.
|
23036, RE: Tire and Rim question Posted by MR BLUNT 2gnt, Mar-16-04 12:24 PM
Traction is your friend. I'm boosting so i wanted the widest tire i cold fit on my rim. I have a 17 x 7 with 225/45/17's. if anyhing that little(very minimal) amount of overhang will help your chances of not getting curb rash. check it out
|
23037, RE: Tire and Rim question Posted by Skrilla, Mar-16-04 12:44 PM
Originally posted by MR BLUNT 2gntTraction is your friend. I'm boosting so i wanted the widest tire i cold fit on my rim. I have a 17 x 7 with 225/45/17's. if anyhing that little(very minimal) amount of overhang will help your chances of not getting curb rash. check it out 
honestly the most rubber to the ground - as you put it - would be to drop 205 aspect width, it leaves a larger and stronger contact patch to the floor than simply fitting the most rubber on a rim, it creates flex in the tire with hard cornering and softer ride but that is it, it provides a performance deficit when handling is concerned since the original topic was about handling the smart thing to do would be 205 if it were confort and performance than it would be 215, 225 is only adding unnecessary rubber and weight
If you want the widest rubber go to 235 on some 8.5" rims with a 32 offset<--DSMr's use it all the time
|
23038, RE: Tire and Rim question Posted by Pushin420a, Mar-16-04 01:21 PM
Hmmmm....interesting...I might see what I can do with a 225....sound interesting...I"m so confused now. damn it
|
23147, RE: Tire and Rim question Posted by Wildflyer897, Mar-22-04 01:54 PM
i want these rims the 18x7.5 with 225/40/18 tires is this good or should i go with 225/45 or 225/35... i don't like sidewall cuz it flexes..
http://www.adrwheels.com/wheels/?sfID1=12&sfID2=62
is the 7.5 going to work.
and teach me about the offset what exactly is it. (english please)
:shrug
|
23148, RE: Tire and Rim question Posted by Uberingram, Mar-22-04 01:55 PM
Originally posted by Wildflyer897 i don't like sidewall cuz it flexes..
Going to trailer your car everywhere or do you like potholes too? :wary
|
23167, RE: Tire and Rim question Posted by Wildflyer897, Mar-23-04 10:17 AM
i'm guessing your implying that i get more sidewall? like a 40 or 45?
|
23168, RE: Tire and Rim question Posted by Skrilla, Mar-23-04 11:20 AM
yes I would say so, that is the reason I'm part of the 16 in rim club still, Cali has some shitty roads, like going North on the 5 freeway past Tustin market place will throw you all over the place
|
23169, RE: Tire and Rim question Posted by turbo8u, Mar-23-04 11:57 AM
Originally posted by Skrilla yes I would say so, that is the reason I'm part of the 16 in rim club still, Cali has some shitty roads, like going North on the 5 freeway past Tustin market place will throw you all over the place
stop whining and drive.
lol.
lets go hit some more hermosa ;)
_________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
silent souls leave .308 holes
|