I was thinking of getting the suspesion technologies anti sway bars to complete my supsension package. They require a moutning kit for the rear bar correct?/ any additional info on tehm would be great/
-98talonESi

3/4 inch front and back...you only need to mounting parts if your car didnt come with a rear sway bar......I just put on the Stillen sway bar kit....almost a inch up front and 3/4 inch in the back and they work beautifully....$175.00 for the set



Quarter mile drag racing is over rated

anyone got the specs an prices to compare the stillen, ST, and RMDSM? i know the RM's were thicker than the ST's.. the stillen's kinda new if i'm not mistaken

I just gave the price for the Stillen....175 for the pair.....RMDSM is 300.00 and ST is like around 280.00



Quarter mile drag racing is over rated

how would i be able to find out if my car has a rear sway bar, i mean, i guess i could look..lol. maybe i answered my own question.
-98talonESi

Well if you have a base model ESi then you don't have one. We just got the suspension techniques front and rear from www.modacar.com . They got them to us quickly but there weren't any new front brackets to accomidate the larger bar and larger bushing. I finally got one of the bushing/bracket combo's on, but the driver side is still not there. I wrapped it in electrical tape to quiet the noise of bar-on-bar action so Stef wouldn't get so annoyed.

If you need the part numbers for the rear, here is all the numbers you need:

2--- MR131754--- Rear control arm--- ~$100
4--- MF430123--- Nuts (no sick jokes michael)--- $4.64
4--- MA450993--- Washers--- $1.60
2--- MB844524--- Bolt--- $8.08
2--- MB844522--- Bolt--- $8.08
2--- MB515245--- Bracket (for sway bar)--- $14.20
4--- MF241251--- Bolt (for bracket)--- $4.56
4--- MB288653--- Nut (again, no sick jokes)--- $4.80
2--- MB892982--- Endlinks--- $33.28

These are all from Satan for a 97 GS-T. If you get the suspension techniques sway bars, they come with bushings so you will not need thoes. Other things you may want to pick-up are for the front just to make your life easier:

4--- MF241279--- Bolt (for bracket)--- $3.36
2--- MB808575--- Bracket (for sway bar)--- $16.40
4--- MB288653--- Nut (you know the drill)--- $4.80
2--- MB892981--- Endlinks--- $62.16

I think the only thing you would want to get if you want to make sure of no downtime are the endlinks and the nut (you know the drill) for the front because if your car is older, then you may round the nut holding the endlink on. If you do that, then you have to cut it off with a dremel (like I had to) and get new links anyway. Plus, having new stuff makes things so much easier.

Goodluck.

so the factory one in the rear is 3/4 also? The stillen is not an upgrade for it?

I was about to post about the stillen bars too!

Now free shipping ! just got an email from them!

Please let me know.

The rear is defently a beefier bar....but there isnt hardly any body roll....I love my Stillen's.....you defently cant go wrong with the Stillen's





Quarter mile drag racing is over rated

damn Thanks for the reply, I msgd you a while a go but your AIM isnt on... wheres the 2gnt love man:P :+

I just got my stillens.

Stillen

Front:.86in / 22mm
Back: .70in / 17.8mm

pretty close, but I have to compare them to the stock ones... Ill do that in a bit. Here are the stock, yes an improvement.

Stock

front: .67in/17.5mm
back: .46in/11.8mm

You will love them....best 175 bucks i have spent in a long time





Quarter mile drag racing is over rated

might I also add that they come with polyurethane bushings.

I hope so, I wont be able to tell what this by itself will improve.

Going in this week end also:

tokico illuminas
pro kits
Ingalls camber kits(maybe)
lower bars
sway bars
Neuspeed upper front bar (maybe)

on the car"
upper strut bars ( ebays)

What do you guys recommend for my lowerd 96 RS?

well www.stillen.com is selling theres like i have said a few times for 175.00 and right now they are offering free shipping...so i recommend the stillen's




Quarter mile drag racing is over rated

                Front            Rear
Stock GS      19mm/.7500"     13mm/.5120"
Stock GST     19mm/.7500"     15mm/.5938"
Susp Tech     19mm/.7500"     19mm/.7500"
RMDSM       20.6mm/.8125"   17.5mm/.6875"

i think the ST was like mild steel whereas the stock bars are
spring steel. and the ST front was adjustable or somethin..

correct me if i'm wrong on any of the specs

anyone got the specs on the stillen?  would be nice to know
what exactly you're getting for your money... :P

I just posted the ACTUAL specs . took them with my caliper.

[div class="dcquote"][i][b]Originally posted by
Chamuko[/i][/b]
I just posted the ACTUAL specs . took them with my caliper.
[/div]

lol sorry my bad i missed reading your reply earlier.. 
i wonder how come there's discrepancies w/ the specs that
RMDSM posts for the stock bars...  i wonder how accurate the
measurements on their bars are then..