| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | Camber Q with an alignment readout (prokit on 18s) | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=18619 |
18619, Camber Q with an alignment readout (prokit on 18s)
Posted by jnam27, Jun-27-03 07:42 AM
I have prokits sitting on 18 x 7.5 inch rims, and aligned the car a few days ago. The readouts were
left front;-1 right front;-1.5
left rear;-1.4 right rear;-2.3
The guy at the alignment shop told me I just need to add 1 or more washer on the right rear (I did $15 camber mod with 4 washers). He told me that the fronts are a little bit out of factory spec, but since the toe was set right, and the front wheels are moving a lot, I really don't need to get a camber kit. He said I just need to rotate the wheels often.
Is he correct or bull-shitting?
In the exterior/interior board, somebody said prokits do require the front camber kit if the wheels are 18s???
Thanks in advance.
|
18647, RE: Camber Q with an alignment readout (prokit on 18s)
Posted by jnam27, Jun-29-03 06:14 AM
:-( Come on!!
I know some of you guys have 18s on prokit:-(
| |