Go back to previous topic
Forum nameHandling/Suspension
Topic subject15$ camber mod question
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=17532
17532, 15$ camber mod question
Posted by KSeclipse, May-04-03 05:00 PM
I searched and couldn't find an answer, I got eibach sporlines and when i put them on i know i'll need a camber kit. My question is that, i bought the stuff for the rear camber but they were 8.8 grade, not 10.9. and i dont want my shit to break, will i be allright? also how many washers can i add and still be safe?
17537, RE: 15$ camber mod question
Posted by tim96rs, May-04-03 06:43 PM
Yes grade 8.8 will work. I've been using them for over two years. I used about 10-12 washers I think. It has over 2 yrs since I did it.
17542, RE: 15$ camber mod question
Posted by Jivedady63, May-04-03 07:54 PM
start with 5 washers on each bolt with one locknut, see how it is and then add or subrat washers, you will be fine with 8.8
17644, RE: 15$ camber mod question
Posted by derek, May-09-03 04:46 PM
Use a lot of washers =)
I used two rear camber spacers and 6 washers on top of that,
and I still have negative camber with the Sportlines.
-derek

Make sure you don't use too much because the bolt won't be long enough.