| Go back to previous topic | |
| Forum name | Handling/Suspension |
| Topic subject | If you have an RS.....install a 19mm GS-T front bar |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=171&mesg_id=174 |
|
174, If you have an RS.....install a 19mm GS-T front bar Posted by DeanoD, Dec-31-69 06:00 PM That is an upgrade from the 16mm bar that is already installed. The factory sway bars are spring steel and the aftermarket are mild steel.....thicker does not always mean stronger. IMHO the only bars worth upgrading to are the RMDSM. You can also stiffen up the existing bars you have by using Energy Suspension poly bushings. They twist less and that translates to a thicker bar. Try them and you will feel the difference. If you have the original factory RS front sway bar, order the 16mm front bushings for it. The clamps on the RS/GS/GS-T are all the same the internal hole on the bushing is different sizes. | |
