could someone with the above setup please post a pic of how high you rear is, i just installed the pro kits and the rear is still is too high, i can fit like three fingers in the wheel gap.
later
"Z"

come on guys someone help me out, before i start lookin for coilovers, it has been two days and my car sits way too high.
later
"Z"

Did you cut the bumpstops?

Are the springs properly seated on the spring perch?

Are you sure you have the right shocks?

Are you sure you didn't accidently put the front springs in the back? (if i remember correctly, the fronts are thicker)

How much did you tighten down the struts? See what happens if you try to tighten more.

Look into the wheel well and see how the spring sits on the shock, is it actually being compressed or is it just sitting there? ie, can you move the spring?

no i did not cut the bump stops, when i had the tokico setup i didn't and i got the ride hieght that i liked but no adjustablity.

yes, i have the right shocks.

no, i made sure that the spring placement was correct.

i tightened down the shocks as much as possible i will try to do more but i doubt it has more thread to grab.

i will check how the spring is sittin.
thanks for the help man anything else please let me know.
later
"Z"

If i remember correctly, the Koni yellows had an adjustable spring perch.

nope...
later
"Z"