| Go back to previous topic | |
| Forum name | Handling/Suspension |
| Topic subject | Which Ingall Camber kit do I need? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=16340 |
|
16340, Which Ingall Camber kit do I need? Posted by techboy, Mar-11-03 06:38 PM I have a set of Tockio blues and Eibach Prokits and I'm getting ready to install now that the weather is finally warmer :0 I was told on here before to get the ingalls kits at GMP Performance. Which kits do I want ... the -3/4 to 1 or the +1 1/4 to 3? And do I want poly, rubber or brass? I'm thinking poly (I hear the rubber squeaks) but I have no idea on the number adjustments. TIA. | |
|
16345, RE: Which Ingall Camber kit do I need? Posted by docrmarten, Mar-12-03 05:15 AM Just so you know, it's the poly ones that are squeaky but offer a stiffer feel. The rubber ones are more of a stock feel but don't squeak. Get your alignment done first to figure out what ones you need. | |
|
16347, RE: Which Ingall Camber kit do I need? Posted by techboy, Mar-12-03 06:01 AM Why would I have it all aligned and then take it all back apart to put in the camber kits? Or am I misunderstanding - do I not have to take it all apart to put in the camber kits? | |
|
16398, RE: Which Ingall Camber kit do I need? Posted by John99RS, Mar-14-03 07:04 AM Personally, I have the same setup as you and I went with the rubber bushing ones (-3/4 to +1) because my last ones were poly and they squeeked like hell after a while. I didn't need any more than a +1 degree of correction and I think you would have upper control arm clearance issues with the one that goes out +3. | |
|
16430, RE: Which Ingall Camber kit do I need? Posted by techboy, Mar-16-03 03:33 PM Thanks a lot John99rs, I've been trying to figure out exactly which degree kit to go with for a while now, but nobody has been asnwering my question. Points for you! | |
.