| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | KYB AGX with prokit |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=13748 |
13748, KYB AGX with prokit
Posted by OZ_GS, Nov-28-02 03:07 PM
Will it work ok to have the AGX's al front and rear with prokits?? I have read about issues with the front if you lower too much but I am not really "slamming" it with prokits so I was thinking it would work just fine....
Thoughts/Comments/Pictures????
All is welcome,...
TIA
Chad
|
13749, RE: KYB AGX with prokit
Posted by OZ_GS, Dec-02-02 01:19 AM
Bumpitty....NE1??
|
13750, RE: KYB AGX with prokit
Posted by rhui, Dec-02-02 05:21 AM
Hey,
I dunno about KYB AGX with Prokits, but Im running KYB AGX with H&R Sport. The sports are way too soft for the kyb and the ride is OK, but over bumps, it hits the bump stops cause the shock is longer than normal.
|
13751, RE: KYB AGX with prokit
Posted by HadesOmega, Dec-03-02 08:20 AM
hmm I think you'll be fine, I got skunk2s though... I haven't had any problems.
|
13752, RE: KYB AGX with prokit
Posted by Amish_Eclipse, Dec-04-02 04:20 PM
KYB's are good for a slight drop. if you plan on a mild drop than go with them. for anything more i'd suggest illuminas or konis
|
13753, RE: KYB AGX with prokit
Posted by OZ_GS, Dec-04-02 10:53 PM
Thanks for the replies...I think I will give them a try...
Chad
|
13754, RE: KYB AGX with prokit
Posted by rameencool, Dec-06-02 05:36 AM
When you do the install,
MAKE SURE you cut the bumbstops in half.
This will give you extra travel and you will still have protection against bottoming out.
|