anything else i should know before getting it done? Im going to do it today or tommorow afternoon. I'll be using the write-up on the main page but wanted to know if there are any other tips i should know when installing them. thanks

they're a piece of cake, Depending on the drop you have you may need to trim the inner lip on the rear fender. When you put the washers in it pushes the top of the wheel out, closer to the fender,I had to trim a 1/4 with a 2" drop, and I still need to trim it more.

I always hear of people having to trim or roll the fenders, but I had no trouble at all. I was dropped 2" on H&R Race springs and on 17x7 wheels.

ok thanks, is it hard to trim the fender? I wasnt able to do it this week so now I have a weekend project

I used a die grinder with a cutting wheel, It's the fastest & easiest. If you dont have acess to air tools then it could be a pain.