| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | Think my front camber kit is worn out | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=13099 |
13099, Think my front camber kit is worn out
Posted by mitsudsr, Nov-02-02 09:52 AM
My cars steering has been sloppy lately the front has been wobbling arround. Well I went to a local alignment shop and they showed me the problem. The whole upper control arm wobbles right at the point where the camber kit is. It is like the middle of the camber kit is worn out. I have the ingalls kit, is this common? Well I guess that I will have to buy a new set for the front. Where is there a cheap place to get just the front two. Thanks,
Patrick
96 GS
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies
|
13100, RE: Think my front camber kit is worn out
Posted by 9D9 MITSU RS, Nov-05-02 01:54 PM
have you had the balljoint recall done?
|
13101, RE: Think my front camber kit is worn out
Posted by XtremeRS, Nov-06-02 09:07 AM
What exactly was loose? It could be possible that the nuts that tighten the adjustment slider part on the ingalls kit came loose. Maybe all it needs is some tightening?? The kit shouldnt wear out really..
| |