| Go back to previous topic |
| Forum name | Handling/Suspension |
| Topic subject | Speed Bleeder sizes for our cars? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=12929 |
12929, Speed Bleeder sizes for our cars?
Posted by Mystic511, Oct-23-02 04:46 AM
was checkin out www.speedbleeder.com
Anyone who ordered before know what sizes (or size numbers) to order and anything else that might be needed?
tia
|
12930, RE: Speed Bleeder sizes for our cars?
Posted by mcgyvr, Oct-23-02 04:50 AM
you need part number sb1010
|
12931, RE: Speed Bleeder sizes for our cars?
Posted by Mystic511, Oct-23-02 05:43 AM
I'm guessing that's for both fronts and backs.. and I'll need one for each one? So 4 total?
Thanks man, i just noticed that you've been pretty much the first person to reply to all my posts.. gotta give you feedback for that! :)
|
12932, RE: Speed Bleeder sizes for our cars?
Posted by Mystic511, Oct-23-02 06:39 AM
ok.. i feel stupid.. there's a list right on the webpage for the sizes.
Work sucks.
|
12933, RE: Speed Bleeder sizes for our cars?
Posted by mcgyvr, Oct-23-02 06:54 AM
>ok.. i feel stupid.. there's a list right on the webpage for
>the sizes.
>
I didnt want to tell you, I dont like making people feel stupid
Not that you are,,,, oh crap there I go again :)
Yes work sucks
|
12934, RE: Speed Bleeder sizes for our cars?
Posted by HadesOmega, Oct-23-02 10:48 AM
now what size for Dual Piston Calipers? :P they are bigger.
|
12935, RE: Speed Bleeder sizes for our cars?
Posted by DeanoD, Oct-23-02 12:46 PM
what about the clutch bleeder? what size is it?
I know a speed bleeder will work on that too.
|
12936, RE: Speed Bleeder sizes for our cars?
Posted by Ichiban, Oct-24-02 06:38 AM
sb1010 is for 89-94
Use sb7100 for all models, including GSX calipers...Merlin.:P
(that's for disk brakes, not drum)
|
12937, RE: Speed Bleeder sizes for our cars?
Posted by gzrs99, Oct-24-02 01:53 PM
This was taken from my previous post # 1672. For drums i'm using 10mmx1.0. The front was 7mm x 1.0 Just for the hell of it I've replaced the front clutch bleeding screw with 10mmx1.0**This is very important the bleeding screws must be metric otherwise the STANDARD Threading will Strip***. Oh yeah all the bleeding screws can be found at Pep boys. Under the HELP Misc. parts section -- speed bleeder screws.
|