| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | Best way to bleed brakelines when installing stainless steel lines? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=12865 |
12865, Best way to bleed brakelines when installing stainless steel lines?
Posted by Mystic511, Oct-21-02 04:25 AM
I'm going to attempt to do the brakelines soon. What's the best way to go about bleeding the new lines?
Can you do one brake line at a time? I don't have enough jackstands to do all four.
Any help would be appreciated.
ps, is there a write-up around somewhere?
|
12866, RE: Best way to bleed brakelines when installing stainless steel lines?
Posted by vegasdsmr, Oct-21-02 11:22 AM
im sure hadesomega has a writeup... bleed the rear pass side first, then the rear dr. side.. then the front pass side, then the front dr. side (in that order, or the furthest away from the resevoir)..
good luck....
| |