Hey i got some maxspeed coilovers and some tokico blue shocks. I was wondering how much it costs to have these both installed? Thanks!

cost about 4-6 hours of time, and about a 50$ deposit at autozone for use of their spring compressor tool.....

www.vfaq.com search for the groundcontrol install

also, corbin has a good writeup, but im not sure where it is anymore... hopefully someone can post it up.. he has all the torque specs..

a shop, i dunno......
good luck

EXACTLY!!! Do it yourself and learn a little bit about your car. Trust me it's not that hard. All you really need besides the spring compressor is a breaker bar and you will also need open end wrenches for the sway bar links. Check out Corbin's walkthru here. That's all I used the first time I worked on mine and now it's something I could do in like 4 hours.

http://www.2gnt.com/www/corbin/struts.html

________________________________________________________________________________________
current status - unknown
Project: Baby on the way


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Me and a friend did mine in about 6 hours, only because we were making one stupid mistake after the other. Now that we have done it i would say we could do it again in 3 - 4 hours. The rear is a friggin snap, took us about half hour, thats only because we had to compress the springs. Good learning experience and a definate confidence booster, even though i screwed mine up :wary......hehe :thumbsup

If you don't want to do it yourself.It should take about 3 1/2 hrs and $200-$300.

$200 to $300 is RAPE.

$100 is what the local shop raping zone has always charged.

________________________________________________________________________________________
current status - unknown
Project: Baby on the way


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com