Does it matter if they came off a car that had ABS?

I am looking for brackets as well right? Anything else I should keep my eyes out for or are those two things all I need off the car.

Tia
Brian

Doesn't matter if it has ABS or not... they are all the same. If you find a 2 piston caliper equipped car in a junkyard, just take the caliper right off of the hub, and that will include the bracket. Also take the lines. They are slightly different between us and them.
-=B-=

My lines were the same. It just depends on whether they're the screw-in type or the banjo type.

If they're the banjo variety, they should be the same.

i believe it depends on the type of car you get it from.. if its from a gsx/tsi-awd then the fittings should be the same, but if from like a stealth/3000gt then i think their line fittings are different.

Lines don't really matter though if you're just going to slap on some SS anyway right? :)

Well, my stuff was off of a 1G AWD, I don't know if that matters. The fitting on the end of the stock 2GNT line bottomed out in the caliper and was nowhere near sealed. A couple of washers did the trick. ;)