Yes, I know you can swap the front brakes from the 2nd gen GSX, and the rear would take alittle more work..

But the thing is, would the 1st generation brakes bolt-up to our second generation, even though it is made by Mitsubishi..

Thanks

~Tacoman

The First gen GSXs have one piston..might as well get a twin piston

96 RST

http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs

I know the two pistons are better, but wouldn't one piston save weight and space? Such as, if you're aftermarket 16 or 17s won't fit on the 2nd Gen brakes, but will fit with 1st Gen brakes.

Anyways, will it bolt-up though?

Thanks

they would be the same size as 2g brakes. There is no point in swapping. Any wheels that can't fit over the 2gnt brakes certainly can't fit over the 1g GSX brakes.

the 1st gen. 92-94 has the 2piston. yes its bolt on, you just need longer brake lines and 16's rims.