Hi people, what is the widest tire I can put in a 7" rim, i don't want it to look like it's stuffed there, or be negative por handling, do 235 fit's or i will have to go to 7.5"
Thanks

i think you could get away with the 235's but you might run into rubbing problems with the fenders.. as far as performance wise im sure the 235's might be a bit too much.. unless you have good power to work with.

>i think you could get away with the 235's but you might run
>into rubbing problems with the fenders.. as far as
>performance wise im sure the 235's might be a bit too much..
>unless you have good power to work with.

Oops i forgot to mention this is not for the long gone (well not a lot)Eclipse is for a 240sx, why do i post here, cus you guys rule, know stuff and helped a lot...

do 235 fit on 7" or on 7 1/2" and what is the ideal wheel for a 235 tire.

<Oops i forgot to mention this is not for the long gone (well not a lot)Eclipse is for a 240sx, why do i post here, cus you guys rule, know stuff and helped a lot...do 235 fit on 7" or on 7 1/2" and what is the ideal wheel for a 235 tire.>

I would go with at least the 7 1/2. The tire would bulge out quite a bit on a 7. Checking Nitto's site said the 235 is recommended on a 7.5-9.0 with 8 as ideal. I have them on a 8" wheel and the tires sidewalls are pretty much straight up and down with the wheels edge. That is with the 17's in my sig. Most of the guys on the Max board with 18's go 235/40-18 with a 18x8.5" wheel. There are even a few with 9's. Hope that helps.

I would only go with 225's personally. Even those bulge a little bit on a 7" wide wheel...

Yeah I wouldn't go above a 225 on a 7" rim.

Una salus victus.
He will triumph, who knows when to fight, and when not to fight. - Sun Tzu

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

You can go to 235 on a 7" wheel. I have 16x7 RX-7 wheels with 225s, and you can fit a tire bigger than 225. I've seen RX7's with stock 16x7 wheels running 235 and one with 245. Best way is to try it out at a tire shop.

I had 235/40s on my 17x7 and they looked aweseome. They are fat ass 'Mustang' Tires. I had to roll my fenders which ain't bad.

96 RST


http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs

i got 225 on the GSX rims, 17/6.5
later
"Z"

those 3G RX7 wheels are actually 16x8".

juan

I'f I didn't have an Eclipse i would have a 240sx... They are BAS AS HELL. Can't beat a rear wheel drive car.

Juan, that's right...they are 16x8. I accidentally typed in the wrong key. Just been so delirious lately with all this damn summer school work. :-(

18 x 8 42 offset will they fit my car without fender rolling?