i have a firend who has a set of the 6 spoke BMW wheels off a 3 serise he got the for free (not stolen given to him by bmw dealer ship he workes for after some one traded them in on a new set of wheels) so i can get them cheep i just did not know if the offset and back spacing will work . i hope that they will because they are extremly lightweight dose any one know thanks.

i personally dont know if they will work, just do some research. Our bolt pattern is 5x114.5 check and see if theres is the same

Most of the bmw rims I have seen say "bmw" right on them. In my opinion I wouldn't put them on if they say bmw on them, that will just look rediculous. :nono

<http://photos.yahoo.com/bc/gahman2/vwp?.dir=/My+Photos&.dnm=Myeclipse.jpg&.src=ph&.view=t&.hires=t>
AEM intake/SpiralMax/Plugs-Wires/GST Exhaust/17" Konig Velocity/Mirror Tint/grillcraft grill/EBC brakes/Brembo rotors
Coming:BoredTB

<http://photos.yahoo.com/bc/gahman2/vwp?.dir=/My+Photos&.dnm=Myeclipse.jpg&.src=ph&.view=t&.hires=t>
AEM intake/SpiralMax/Plugs-Wires/GST Exhaust/17" Konig Velocity/Mirror Tint/grillcraft grill/EBC brakes/Brembo rotors
Coming:BoredTB

You can remove the center caps.

i believe BMW wheels are a 5x120 bolt pattern.
lates
james

Not sure about the botl pattern. but the offset would be a bit strange. They would have an lower offset more suited for RWD (which BMWs are). Look it up. Our offset is 46MM and our bolt pattern is 5X114.3
-=B-=

Nope...They wont fit. Jamesman is right, they have a 5x120 bolt pattern.