Go back to previous topic
Forum nameHandling/Suspension
Topic subjectRE: How do you lower car over 2.5"????
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=9029&mesg_id=9035
9035, RE: How do you lower car over 2.5"????
Posted by AvengerES97, Dec-31-69 06:00 PM
> Do you have the front camber kit installed and is your
>camber within factory specs? I'd bet not, because with that
>much of a drop, proper camber will make the outer edge of
>the control arm hit the fender well in which the control arm
>rides up into, at least thats what i can tell with my 2"
>drop and ingalls kit(+1.25-3 degreees) anyway..If you don't
>want your camber to be in spec with excessive drops then you
>wont have problems with the clearence on the control arm and
>fender..


yes my camber is well within spec. I am using the ingalls kit you are and my camber was negative about .2 degrees. The alignment guy was suprised at how perfect the camber was at such a drop. The caster and toe are also perfect at this height. :thumbsup




Chris Jones
1997 Dodge Avenger ES 5spd
"Racing Your Honda Is Like Running In The Special Olympics.....Even If You Win You're Still Retarded!!!

I generated this page in 0.010909080505371 seconds, executing 6 queries.