with the shield/caliper mount, did you get the parking brake shoes, levers, springs and retainers? it's been about a year since i did mine, so my memory might play tricks on me, but i don't think any of your current drum brake parts will work for the parking drum brakes. the shoes, springs and retainers are cheap from autozone or advance, but the levers are a dealer item. of course if you have all the parts i have mentioned above no worries. the only other things i can mention are check your wheel bearings/hubs while you are at it since you have to remove them to change out the dust shield for the caliper mount. and i had to file the slot on the back side of the caliper mount/shield where the clip that holds the parking brake cable in place goes a little so the clip would fit properly. good luck :thumbsup