okey ive been thinken alot for the last 3 days
and this is what i came up with

splice the 2 coil wires PIN# 2 and 3 on the 1997 ECU and put 2 diodes between them and connect them with the ''Green Ignition cut wire'' from the rev limiter

what do yall think..??

also i wanna try two other wires..

Pin # 46 and # 67 they both go TO the asd relay.. maybe if it cut one of them off with the green wire i will have no sprak either.. but im not sure

does the ecu send negative ground pulses tot the coilpack..??

if so it has to be grounded before it can reach the coil pack and spark the plugs right..??

so the green wire takes the negative pulse but we have 2 coil wires from our 1997ecu thats why im thinking maybe the only way this will work is with diodes pointing towards the green wire of the Beer Rev limiter.. so it's giving not getting pulses

Hope thiss wil work..
give me your thinking about this option..

Greets Aeren