Hello guys..

i have a Bee*R rev limiter type-b..
got it for a cheap price but there is little problem cuse the instuction manual is in japanse..

it is a universal product so it has to fit on the 420a as well..

my question is does anybody know how to instal this..

i need to find the rpm signal wire from the ECU..
and the ignition wire..

maybe a pinout from the 420a ECU
or a write up on how to install this launch controller and ak 47 boombastic flme thrower..

i hope you guys can help me..
Thanks..

sorry for my english im from the netherlands so please dont judge my writing..;)

Check the wiki on the main page. Ecu pin outs are there.

He thanks for the awnser..
but i cant find my 1996 ecu pinout on main menu..

and ive searched alot for 420a rev limit install..

maybie you guys can help me out with the install looks quite easy

According to Bee-racing:
Red wire: 12V+
Black wire: Earth
Yellow wire: RPM Signal (what pin on 420a 1996 ecu..??)
Green wire: Ignition signal (what pin on 420a 1996 ecu..??)


here is a complete write up for another car..

http://www.driftworks.com/forum/faq-new-members-please-read/76001-bee-r-rev-limiter-fitting-guide.html


Hope you guys can help with this..

i wil make pictures and a complete how to for the futureguys who want to install this rev limiter..

hope yall can help me out..
Take care..

Also i dont see witch pinnumber is for the ignition wire and dont see the pinnumber for the rpm signal..

looked at all the ecu pinouts of the 420a..

maybe one of you guys can tell witch pinnumber it is that i need..

Meny thanks..