First, I'd like to say thanks for taking the time to look over things, Jason. I appreciate the review.

Second, I went ahead and updated the AE points, added fuel, and updated some targets in the AFR table. I didn't do anything with my timing map yet however, could use some guidance or tips in that area...I'm pretty much lost there.

Third, there is def some noise going on, because I can physically hear a high pitched whine sound from time to time during idle. I do have sensor grounds and MS ground grounded to the firewall. Currently, my negative battery terminal and wiring is close to shitting the bed and needs to be cleaned up. I was thinking of running a heavier gauge wire off the negative to the same point on the firewall where all the MS grounds are and see if that cleans things up.

I'll do some datalogging after work and shoot you another email when I get there.