| Go back to previous topic |
| Forum name | Engine Management Systems & Controllers |
| Topic subject | MegaSquirt Knock Sensor |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=5404 |
5404, MegaSquirt Knock Sensor
Posted by Dstach, Dec-31-69 06:00 PM
I know you have to use the gm ESM but does anyone know what kind of input I would need? As in the high or the low.
|
5405, RE: MegaSquirt Knock Sensor
Posted by VelocitaPaola, Dec-31-69 06:00 PM
Originally posted by Dstach
I know you have to use the gm ESM but does anyone know what kind of input I would need? As in the high or the low.
Neither, you need an interface designed to handle the knock sensor's signal. Like this one:
http://viatrack.ca/
|
5406, RE: MegaSquirt Knock Sensor
Posted by Dstach, Dec-31-69 06:00 PM
Don't I still need an input wire for megasuirt tho. I have to need an input wire.
|
5407, RE: MegaSquirt Knock Sensor
Posted by VelocitaPaola, Dec-31-69 06:00 PM
Yes, but with a proper interface you don't need any additional circuitry. You can connect it directly to the processor pin (JS4 or JS5 for MS2/MS3).
|
5408, RE: MegaSquirt Knock Sensor
Posted by Dstach, Dec-31-69 06:00 PM
Ok thank you! There just wasn't much info on the knock sensor haha. Big help tho!
|
5411, RE: MegaSquirt Knock Sensor
Posted by SilvrEclips, Dec-31-69 06:00 PM
Has anyone been successful running a knock sensor with MS?
|
5412, RE: MegaSquirt Knock Sensor
Posted by VelocitaPaola, Dec-31-69 06:00 PM
Originally posted by SilvrEclips
Has anyone been successful running a knock sensor with MS?
Sure, it's not so difficult to do...
|