Alright, here is a screen shot of my current settings, the only difference in the pics from the settings i have on the car now is the "spark Output" on the controller is currently set to "going high" i changed it before i took this pic because i recieved advice via 2gnt chat.

with that being said,
My problem is that no matter what I seem to do i can not get a Logical tune to work for my spark tables. I am running Megasquirt II version 3.57 /extra. Currently using Tunerstudio v0.999.7


The first time i went to start my car, i was only getting backfires from it every now and again, so i thought and talked to some teachers at UTI, that maybe the plug wires are reversed. so i swapped them and wala it started. ran like crap but it started. now i am 100% positive that i wired the coil correctly the first time so i dont know why i had to do this

so basically i am just asking for somebody who knows what s/he is looking at to tell me if i have some of these settings incorrect. please let me know if you want to see more i will respond asap, usually pretty quickly.

<a href="" target="_blank"><img src="" border="0" alt="Photobucket"></a>

Thank you for your time, and im sorry the post is so long.

Under 'More Ignition Options' change your dwell from Fixed Duty to Standard Dwell, with a Max Dwell of about 3.2 with VB921's or 5.0 with BP373's.

Excellent thank you very much.